Wasking Machine wobble (O/T)

[DIFFBROOK]

Can anyone tell me how I can prevent my damm washing machine was wobbling around whilst on spin?

Our kitchen floor is slightly uneven and I have tried to reset the legs to compensate, but not without any real success. So any tips would be gratefully received.

 

[NF9]

Punch it.

 

[Muhammad - I’m hard - Bruce Lee]

are you making sure your load is even? you can do more harm to a machine by washing small loads as it doesnt get chance to distribute itself evenly around the drum.
you can try putting a piece of worktop underneath the appliance if there is room.
ideal load for a machine is when you can fit your fist inbetween the washing and the top of the drum (without forcing the clothes down obviously)

 

[Taybha]

cant get my missus off the dam thing when its on spin cycle so b4 you try and fix it you should check with her she wants it fixed,you know how women get when you take away their small pleasures in life,alternately if you have the old type with a chunk of concrete as the counter balance wieght im pretty sure these are adjustable.

 

[Muhammad - I’m hard - Bruce Lee]

new or old..they still have the concrete and are fixed...no adjustment

 

[Taybha]

are you making sure your load is even? you can do more harm to a machine by washing small loads as it doesnt get chance to distribute itself evenly around the drum.
you can try putting a piece of worktop underneath the appliance if there is room.
ideal load for a machine is when you can fit your fist inbetween the washing and the top of the drum (without forcing the clothes down obviously)

6ft 4 of domesticated knowledge and the advice hard to argue with

 

[Muhammad - I’m hard - Bruce Lee]

6ft 4 of domesticated knowledge and the advice hard to argue with

cant cook though

 

[Taybha]

ready for anything
[yt]Lw_o0QP7I5o[/yt]

 

[manilaseagull]

either turn it off/on and try again


or dont touch it leave it to the woman of the house

 

[colinpants]

have you taken the transit packing out?

 

[Fergus96]

are you making sure your load is even? you can do more harm to a machine by washing small loads as it doesnt get chance to distribute itself evenly around the drum.
you can try putting a piece of worktop underneath the appliance if there is room.
ideal load for a machine is when you can fit your fist inbetween the washing and the top of the drum (without forcing the clothes down obviously)

Fist the washing machine?!?!

 

[seagullsovergrimsby]

Can anyone tell me how I can prevent my damm washing machine was wobbling around whilst on spin?

Our kitchen floor is slightly uneven and I have tried to reset the legs to compensate, but not without any real success. So any tips would be gratefully received.

It might be down to how many rpm it does on the spin cycle. The higher the rpm the more it will wobble. If you adjust the legs a spirit level comes in handy to tell you when the machine is dead level. Other than that get the missus to sit on it as it will be cheaper in the long run than a rampant rabbit.

 

[NF9]

It might be down to how many rpm it does on the spin cycle. The higher the rpm the more it will wobble. If you adjust the legs a spirit level comes in handy to tell you when the machine is dead level. Other than that get the missus to sit on it as it will be cheaper than a rampant rabbit.

:safeway2:

 

[Barrel of Fun]

I had the same problem in my flat on Brighton Seafront. The best solution that we came up with was to screw in a wooden bracket to stop it moving. Still shook the place up though.

 

[NF9]

I had the same problem in my flat on Brighton Seafront. The best solution that we came up with was to screw in a wooden bracket to stop it moving. Still shook the place up though.

Wooden?
Sorry what century is this 17'th century?